Lead Acid Battery MapleSim Model - Lead Acid Battery S-Function - MapleSim Model Gallery

Lead Acid Battery

This model simulates a lead acid battery driving a DC motor. The current sources are used to change the circuit switch from the battery driving the motor to the current sources driving the motor at the 6 hour mark. Then, the current sources drive the motor and recharge the battery at the 10 hour mark.
Close

Download this MapleSim model

This model requires MapleSim. If you do not have MapleSim, contact us for a live demonstration.

  • How this model works and how it was developed
  • How this model can be modified to fit your requirements
  • How we can assist you in developing your own models to solve your engineering design problems

Let Maplesoft Engineering Solutions provide you with the expertise and tools you need to meet your project requirements quickly and effectively. Ask our experts today!

Contact us today


If you have MapleSim, download the model here:

Download the Model Request an S-function

Close

Request an S-Function

MapleSim Models can be readily exported as royalty-free S-functions. To request the S-function corresponding to this model, please fill in the form below.


Model: Lead Acid Battery
Industry:

Submitting form...

Thank you for requesting the S-Function. Your request has been received and you can expect to hear from us shortly. Close Window
Oops! There was a problem. Try again later Close Window
Model Images
  • LeadAcidBattery Simulation shows state of charge as well as battery temperature due to inefficiencies during charge and discharge.
  • model Model diagram of a battery powered DC motor.
  • Subsystem Subsystem view of the electrical components that make up the battery model
  • plots State of charge as and battery temperature due to inefficiencies during charge and discharge
Simulink is a registered trademark of The MathWorks, Inc.