Hydraulic Press with Regenerative Circuit MapleSim Model - Hydraulic Press with Regenerative Circuit S-Function - MapleSim Model Gallery

Hydraulic Press with Regenerative Circuit

This example shows the difference in performance of a regenerative hydraulic circuit and a non-regenerative circuit when used in a material press configuration. Both hydraulic systems will be used to press a material with deformable properties and the difference in performance can be compared.

A single rod cylinder moves slower when extending compared to retracting because of the different piston areas. A regenerative circuit can be used to cause a cylinder to extend more rapidly than it could with pump oil flow alone. The rod end of the cylinder is connected to the main pressure line, so the oil which normally would be discharged to a tank will join with the pump oil, increasing the speed of the piston.
This model uses the MapleSim Hydraulics Library from Modelon

This Model Requires MapleSim

If you do not have MapleSim, contact us to arrange a short, live demonstration with a MapleSim product expert, where you will:

  • See how this model operates
  • Learn how it was developed
  • Discover how it can be modified to fit your requirements
Request a Live Demo

If you have a copy of MapleSim available, you can download the model here:

Download the Model

Request an S-Function

MapleSim Models can be readily exported as royalty-free S-functions. To request the S-function corresponding to this model, please fill in the form below.

Model: Hydraulic Press with Regenerative Circuit

Submitting form...

Thank you for requesting the S-Function. Your request has been received and you can expect to hear from us shortly. Close Window
Oops! There was a problem. Try again later Close Window
Model Images
  • model The model schematic of the system
  • Simulation results Simulation results
  • 3d Visualization of the simulation results
MapleSim Video
Video not available in this browser.
Simulink is a registered trademark of The MathWorks, Inc.