Symbol
|
Condition
|
Default
|
Units
|
Description
|
ID
|
|
-
|
|
-
|
Defines whether the component is:
true - ideal or
false - non-ideal
|
ideal
|
data source
|
|
GUI
|
-
|
Defines the source for the loss data:
•
|
by an attachment [attachment]
|
•
|
by an external file [file]
|
|
datasourcemode
|

|
|
true
|
-
|
Defines whether one efficiency data table is used for all meshing loss calculations [ ] or the efficiency of each meshing gear pair is given by a separate data table [ ].
|
SameMeshingEfficiency
|
|
-
|
|
-
|
Rear ring/Rear Sun Gear ratio
|
ratio2
|
|
|
|
|
Front Ring/Rear Sun Gear ratio
|
ratio1
|
|
|
|
|
Number of planet pair gears for both front and rear planetary gears
|
numberofPlanets
|
|
same loss data = true
data source = GUI
|
|
|
Defines all velocity dependant meshing efficiencies.
The columns:
[ ( ( ) ( )]
Five options are available:
Entered value is taken as the constant efficiency for forward and backward cases
( ) = ( ) =
First entered value is taken as the constant efficiency for forward case and the second for backward cases
( )= ( ) =
First column is ignored and the second and third values are taken as constant efficiencies for forward and backward cases, respectively
2nd column is forward and backward efficiency
( ) = ( ) = ( )
2nd column is forward efficiency
( )
3rd column is backward efficiency
( )
|
meshinglossTable5
|
ideal = false
same loss data = true
data source = attachment
|
-
|
Defines velocity dependant meshing efficiency
First column is angular velocity ( )
(See  below)
|
data5
|
ideal = false
same loss data = true
data source = attachment or file
|
-
|
fileName5
|

|
ideal = false
same loss data = true
data source = attachment or file
|
|
-
|
Defines the corresponding data columns used for forward efficiency ( ) and backward efficiency ( )
Two options are available:
Data column corresponding to the column number is used for both forward and backward efficiency
Data column corresponding to the first column number is used for forward efficiency (
and data column corresponding to the second column number is used for backward efficiency (
|
columns5
|
](/support/helpjp/helpview.aspx?si=3723/file09605/math1416.png)
|
ideal = false
same loss data = false
data source = GUI
|
|
|
Defines rear Ring/rear Planet velocity dependant meshing efficiency as a function of .
The columns are:
[ ( ( ) ( )]
First column is angular velocity of the ring gear w.r.t. the carrier ( )
Five options are available:
Entered value is taken as the constant efficiency for forward and backward cases
( ) =![eta[2]](/support/helpjp/helpview.aspx?si=3723/file09605/math1523.png) =
First entered value is taken as the constant efficiency for forward case and the second for backward cases
( ) = ( ) =
First column is ignored and the second and third values are taken as constant efficiencies for forward and backward cases, respectively.
Second column is forward and backward efficiency
( ) = ( ) = ( )
Second column is forward efficiency
( )
Third column is backward efficiency
( )
|
meshinglossTable2
|
ideal = false
same loss data = false
data source = attachment
|
-
|
Defines the velocity dependent meshing efficiency
First column is angular velocity ( )
(See  below)
|
data2
|
ideal = false
same loss data = false
data source = file
|
-
|
fileName2
|

|
ideal = false
same loss data = false
data source = attachment or file
|
|
-
|
Defines the corresponding data columns used for forward efficiency ( ) and backward efficiency ( )
Two options are available:
Data column corresponding to the column number is used for both forward and backward efficiency
Data column corresponding to the first column number is used for forward efficiency ( ) and
data column corresponding to the second column number is used for backward efficiency ( )
|
columns2
|
](/support/helpjp/helpview.aspx?si=3723/file09605/math1925.png)
|
ideal = false
same loss data = false
data source = GUI
|
|
|
Defines front Ring/front Planet velocity dependant meshing efficiency as a function of .
The columns are:
[ ( ( ) ( )]
First column is angular velocity of the sun gear w.r.t. carrier ( )
Five options are available:
Entered value is taken as the constant efficiency for forward and backward cases
( ) =![eta[2]](/support/helpjp/helpview.aspx?si=3723/file09605/math2041.png) =
First entered value is taken as the constant efficiency for forward case and the second for backward cases
( ) = ( ) =
First column is ignored and the second and third values are taken as constant efficiencies for forward and backward cases, respectively
Second column is forward and backward efficiency
( ) = ( ) = ( )
Second column is forward efficiency
( )
Third column is backward efficiency
( )
|
meshinglossTable1
|
ideal = false
same loss data = false
data source = attachment
|
-
|
Defines the velocity dependent meshing efficiency
First column is angular velocity ( )
(See  below)
|
data1
|
ideal = false
same loss data = false
data source = file
|
-
|
fileName1
|

|
ideal = false
same loss data = false
data source = attachment or file
|
|
-
|
Defines the corresponding data columns used for forward ( ) and backward ( ) efficiency
Two options are available:
Data column corresponding to the column number is used for both forward and backward efficiency (
Data column corresponding to the first column number is used for forward efficiency ( ) and
data column corresponding to the second column number is used for backward efficiency ( )
|
columns1
|
](/support/helpjp/helpview.aspx?si=3723/file09605/math2463.png)
|
ideal = false
same loss data = false
data source = GUI
|
|
|
Defines rear Planet/rear Sun velocity dependant meshing efficiency as a function of .
The columns are:
[ ( ( ) ( )]
First column is angular velocity of the sun gear w.r.t. carrier ( )
Five options are available:
Entered value is taken as the constant efficiency for forward and backward cases
( ) =![eta[2]](/support/helpjp/helpview.aspx?si=3723/file09605/math2579.png) =
First entered value is taken as the constant efficiency for forward case and the second for backward cases
( ) = ( ) =
First column is ignored and the second and third values are taken as constant efficiencies for forward and backward cases, respectively
Second column is forward and backward efficiency
( ) = ( ) = ( )
Second column is forward efficiency
( )
Third column is backward efficiency
( )
|
meshinglossTable4
|
ideal = false
same loss data = false
data source = attachment
|
-
|
Defines the velocity dependent meshing efficiency
First column is angular velocity ( )
(See  below)
|
data4
|
ideal = false
same loss data = false
data source = file
|
-
|
fileName4
|

|
ideal = false
same loss data = false
data source = attachment or file
|
|
-
|
Defines the corresponding data columns used for forward ( ) and backward ( ) efficiency
Two options are available:
Data column corresponding to the column number is used for both forward and backward efficiency
Data column corresponding to the first column number is used for forward efficiency ( ) and
data column corresponding to the second column number is used for backward efficiency ( )
|
columns4
|
](/support/helpjp/helpview.aspx?si=3723/file09605/math2980.png)
|
ideal = false
same loss data = false
data source = GUI
|
|
![[rad/s, N.m, N.m]](/support/helpjp/helpview.aspx?si=3723/file09605/math3042.png)
|
Defines front Planet/front Sun velocity dependant meshing efficiency as a function of .
The columns are:
[ ]
First column is angular velocity of the sun gear w.r.t. carrier ( )
Five options are available:
Entered value is taken as the constant friction torque for forward and backward cases
( ) =![eta[2]](/support/helpjp/helpview.aspx?si=3723/file09605/math3092.png) =
First entered value is taken as the constant friction torque for forward case and the second for backward cases
( ) = ( ) =
First column is ignored and the second and third values are taken as constant friction torque for forward and backward cases, respectively
Second column is forward and backward efficiency
( ) = ( ) = ( )
Second column is forward efficiency ( )
Third column is backward efficiency
( )
|
bearinglossTable3
|
ideal = false
same loss data = false
data source = attachment
|
-
|
Defines the velocity dependent meshing efficiency
First column is angular velocity ( )
(See  below)
|
data3
|
ideal = false
same loss data = false
data source = file
|
-
|
fileName3
|

|
ideal = false
same loss data = false
data source = attachment or file
|
|
-
|
Defines the corresponding data columns used for forward ( ) and backward ( ) efficiency
Two options are available:
Data column corresponding to the column number is used for both forward and backward efficiency (
Data column corresponding to the first column number is used for forward friction torque ( ) and data column corresponding to the second column number is used for backward friction torque ( )
|
columns3
|
|
ideal = false
same loss data = true
|
0
|
|
Linear damping in rear planet/carrier bearings
|
d2
|
|
ideal = false
same loss data = true
|
0
|
|
Linear damping in front planet/carrier bearings
|
d1
|
d
|
ideal = false
same loss data = true
|
0
|
|
Linear damping in both planet/carrier bearings
|
d3
|
smoothness
|
|
Table points are linearly interpolated
|
-
|
Defines the smoothness of table interpolation
There are two options:
•
|
Table points are linearly interpolated
|
•
|
Table points are interpolated such that the first derivative is continuous
|
|
smoothness
|