Simpson Actuation (3-Speed)

はじめる前に
新機能一覧
Maple ワークシートの作成
Mapleワークシートを共有
Maple ウィンドウのカスタマイズ
Maple システムのカスタマイズ
コネクティビティ
Mathematics
数学
物理
プログラミング
グラフィックス
Student パッケージ
Science and Engineering
科学・エンジニアリング
アプリケーションと例題
リファレンス
システム
MapleSim
- MapleSim Component Library
  - MapleSim Driveline Library
    - Clutches and Brakes
    - Compound Gear Sets
      - Actuation
        Overview
        CR-CR Actuation 4 Speed
        Lepelletier Actuation 6 Speed
        Lepelletier Actuation 7 Speed
        Ravigneaux 4 Speed
        Simpson Actuation 3 Speed
      - Gear Sets
      - Overview
    - CVT and Torque Converter
    - Differential Gears
    - Engines and Dynamometers
    - Gear Selectors
    - Loss Elements
    - Simple Gear Sets
    - Vehicle and Tire
    - Overview
  - MapleSim Tire Component Library
MapleSim ツールボックス
- dSPACE ソフトウェア用の MapleSim コネクター
- LabVIEW と NI VeriStand ソフトウェアのための MapleSim コネクター
- MapleSim B&R Connector
- MapleSim Connector for VI-CarRealTime
- MapleSim Driveline Component Library
  - Clutches and Brakes
  - Compound Gear Sets
    - Actuation
    - Gear Sets
    - Overview
  - CVT and Torque Converter
  - Differential Gears
  - Engines and Dynamometers
  - Gear Selectors
  - Loss Elements
  - Simple Gear Sets
  - Vehicle and Tire
  - Overview
- MapleSim FMI Connector
- MapleSim Tire Component Library
- MapleSim コネクター
- MapleSim 制御系設計ツールボックス
MapleSim ヘルプ
Tasks
Toolboxes
エラーメッセージガイド
マニュアル
数学アプリ

Clutch Arrangement for a 3-Speed Simpson Gearbox

The Simpson Actuation component is intended for use with a Simpson Gear Set (see Simpson Gear). The internal structure of this component is shown below. The combination of the clutches and the activation table, enables the user to easily create a 3-Speed Simpson Gearbox.

Internal Structure

Connections

Name	Condition	Description	ID
	-	Drive shaft Flange	drive
	-	Rear carrier flange (to be connected to rear carrier flange of a Simpson Gear)	rear_carrier
	-	Sun flange (to be connected to sun flange of a Simpson Gear)	sun
	-	Front Ring flange (to be connected to front flange of a Simpson Gear)	front_ring
	-	Integer input for the gear number. (-1: Revese, 0: Neutral, 1,2,3: Forward)	GearNo

Parameters

Symbol	Condition	Default	Units	Description	ID
	-			Added inertia to Clutch components.	J
	-			A 5 by 5 clutch actuation table. first column is for the gear numbers (not used) ordered from -1 (reverse) to 3 (third gear). Zeroth gear designates neutral.	table
Clutch Parameters	See Clutch componet for the description of the clutch parameters.