MapleSim 2019: New and Updated Libraries and Components - MapleSim Help

Online Help

All Products    Maple    MapleSim


Home : Support : Online Help : MapleSim : whatsnew/newComponents

MapleSim 2019: New and Updated Libraries and Components

 

New Libraries

New Components

Updated Components

New Libraries

Electrical > Spice3

Hydraulics > Directional Control Valves

New Components

Electrical > Multiphase > Sensors > Multiphase Quasi-RMS Current Sensor

Electrical > Multiphase > Sensors > Multiphase Quasi-RMS Potential Sensor

Electrical > Multiphase > Sensors > Multiphase Quasi-RMS Voltage Sensor

Hydraulics > Linear Actuators > Double-Acting Cylinder

Hydraulics > Restrictions > Linear Resistance

Hydraulics > Restrictions > Orifice Pressure-Dependent Area

Hydraulics > Restrictions > Orifice Pressure-Dependent Flow

Hydraulics > Restrictions > Plug

Hydraulics > Rotary Actuators > Variable Displacement Motor

Hydraulics > Rotary Actuators > Variable Displacement Pump

Hydraulics > Valves > Check Valve II

Hydraulics > Valves > Check Valve with Pressure-dependent Area 

Hydraulics > Valves > Check Valve with Pressure-dependent Flow

Hydraulics > Valves > Counter Balance Valve

Hydraulics > Valves > Piloted Check Valve

Hydraulics > Valves > Relief Valve

Hydraulics > Valves > Relief Valve with Pressure-dependent Area

Hydraulics > Valves > Relief Valve with Pressure-dependent Flow

Hydraulics > Valves > Shuttle Valve

 

Updated Components

Modelica components have been updated to use the Modelica Standard Library 3.2.3.

Updated Component or Library

Changes to Component

Hydraulics library

The hydraulics library has been significantly enhanced.  MapleSim now supports continuous hydraulics.  The update includes 28 new hydraulics components.

Electrical > Machines > Utilities > Vf Controller

new parameter Economy mode

Electrical > Machines > Power Converters > DCDC > Control > Voltage To Duty Cycle

new parameter use constant Vmax

Electrical > Machines > Sensor > Rotor Displacement Angle

new parameters Positive range, threshold

Electrical > Quasistationary > Multiphase > Admittance, Impedance, Variable Admittance, Variable Impedance

new parameters Frequency dependent, f__ref

Electrical > Quasistationary > Single Phase > Admittance, Impedance, Variable Admittance, Variable Impedance

new parameters Frequency dependent, f__ref

Signal Blocks > Discontinuous > Limiter

new parameter homotopy type. No longer used: limits at initial

Signal Blocks > Discontinuous > Slew Rate Limiter

new parameter Init type, y__start

Signal Blocks > Discontinuous > Variable Limiter

new parameters homotopy type, y__simplified . No longer used: limits at initial

Signal Blocks > Mathematical > Functions > Harmonic

new parameters use complex conjugate, x0Cos, x0Sin

Signal Blocks > Mathematical > Functions > Integrator

new I/O set, reset and new parameters use set, use reset

Signal Blocks > Mathematical > Functions > Limited Integrator

new I/O set, reset and new parameters use set, use reset

Signal Blocks > Mathematical > Functions > Logarithm

new parameter base to set the base of the logarithm

Signal Blocks > Sources > Complex > Log Frequency Sweep

new parameter start time

See Also

What's New in MapleSim 2019