What's New in MapleSim 2024
New in MapleSim 2024.2
MapleSim 2024
A new look for the Hydraulics Library The MapleSim Hydraulics library has received a refreshed look, with the palette components now arranged into new themes that align closely with typical industry uses. This cuts the time spent to build efficient system-level models with hydraulics, and supports the design and development of innovative products.
Updates to the MapleSim Web Handling Library
The MapleSim Web Handling Library, an add-on to MapleSim, offers specialty features for modeling your R2R (roll-to-roll) processes. Here’s what the new 2024.2 update offers:
Explore roller drives and web control strategies: The new Drives and Controls sublibrary provides new components and settings for engineers to design and validate tension control loops for managing R2R web lines. Users new to simulation can get started quickly with the matching set of prebuilt example models.
Reduce the risk of troughs and wrinkles: The new Trough Formation Limit App offers an easy way to test the dynamics of the web line and determine safe operating conditions.
The Sagging Web Component has now the same internal Web Sensor for tension and speed as in Span and Converting Span components.
A common measure for the roller performance, the Slip Ratio calculation is available as a summary variable in several roller components (including Roller Detailed, Contact Roller and Variable Nip Roller).
The capstan limit calculation summary variable, Summary Limit is redefined to provide the roller traction capacity continuously from 0 to 1. A value of 1 means that tension ratio is equal or greater than the capstan limit marking the conditions for the web fully slipping on the roller.
Available to: existing users of MapleSim Web Handling Library 2024.
Updates to the MapleSim CAD Toolbox
The MapleSim CAD Toolbox adds support for recent software releases from CATIA V5, Creo, Inventor, NX, Parasolid, and other CAD tools.
Available to: existing users of CAD Toolbox.
MapleSim 2024 offers a series of enhancements to encourage innovation and save you time and effort when creating and developing simulations. The new release includes tools to easily perform the simulation of multiple design iterations, adds support for the latest version of the Modelica Standard Library, and provides additional components to make it faster to build models.
Rapidly Tune Parameters and Explore Design Concepts
Save time when running iterations of your simulations. The new Rerun panel allows you to significantly cut the time between simulations by skipping the formulation steps when there are no structural changes made to the model.
Narrow down your design decisions by quickly applying different parameter values, initial conditions, and even simulation settings between runs.
It's even simpler to add Maple worksheets for deeper analysis. The new Scripting button lets you add Maple worksheets and organize them for use alongside your MapleSim results.
Expand Your Modeling Capabilities
Leverage the latest Modelica feature set. You can now import Modelica libraries that make use of MSL 4.0.0 features and select from a variety of new components added to the MapleSim standard libraries (including electrical, 1-D mechanical, signal blocks, and more).
New Hydraulics components for defining flow restrictions. Additional Restrictions components (Discretized Pipe, Pipe Bend, Elbow Bend, Change) assist with modeling hydraulic flow through bends, contractions, and enlargements.
The MapleSim Web Handling Library, an add-on to MapleSim, brings additional resources to better simulate your roll-to-roll processes. Using the new 2024 update you can:
Fine tune the modeling of heavier webs. You can now choose to add the effect of machine direction web inertia on the web line.
Apply more control over the web line setup. Using the new Start at Equilibrium setting, you can simplify the setup by starting the simulation in a nonzero tension equilibrium state.
Add flexibility when modeling nip rollers. The Switching Nip Roller component lets you model web lines where the web contact arc changes from one roller to another.
Model the winding of multiple rolls on the same drum. New Wind Drum components support 2, 3, and 4 webs being wound at once.
Additional Improvements to Add-on Products
MapleSim 2024 with the MapleSim Connector for FMI can now import and export FMI 3.0, the latest version of the FMI standard.
The MapleSim CAD Toolbox adds support for recent software releases from NX, SOLIDWORKS, Solid Edge, Parasolid, and other CAD tools.
The MapleSim Heat Transfer Library has gained a new T-junction component for the Water subpackage to improve flow/pressure-drop calculations for systems with branches.
Updates to MapleSim Insight
MapleSim Insight gives machine builders powerful, simulation-based debugging and 3-D visualization capabilities that directly connect to your automation tools. The 2024 release of MapleSim Insight adds support for models using any new MapleSim 2024 features.
See Also
MapleSim 2024: New and Updated Components
Trademark Attributions
Download Help Document
