Signal Pressure Source - MapleSim Help

Signal Pressure Source

Generic pressure source using the input signal as the source pressure

Description

The Pressure component generates a pressure that is proportional to the input signal.  The governing equations are

 $p=\mathrm{inp}\cdot ⟦\mathrm{Pa}⟧$ $p\equiv {p}_{u}-{p}_{d}$ ${q}_{u}+{q}_{d}=0$

Connections

 Name Description Modelica ID $u$ Upstream port portA $d$ Downstream port portB $\mathrm{inp}$ Input signal inp

Variables

 Symbol Units Description $p$ $\mathrm{Pa}$ Pressure across the component ${p}_{x}$ $\mathrm{Pa}$ Pressure at port $x$, $x\in \left\{u,d\right\}$ ${q}_{x}$ $\frac{{m}^{3}}{s}$ Fluid flow rate into port $x$, $x\in \left\{u,d\right\}$

Initial Conditions

 Symbol Units Description Modelica ID ${p}_{0}$ $\mathrm{Pa}$ Initial pressure across the component p0 ${q}_{0}$ $\frac{{m}^{3}}{s}$ Initial flow rate through the component q0