Chapter 2: Space Curves
Section 2.3: Tangent Vectors
Table 2.3.1 lists the essential tangent-vector facts for a curve described by the position vector Rp.
The derivative R′p=ddpRp is taken componentwise.
The vector R′p is tangent to the curve defined by Rp.
If p is arc length s, R′s=ddsRs is the unit tangent vector T.
If T is the unit tangent vector, T·T′=0, that is, T is orthogonal to its derivative.
The length of R′p is given by ρ=∥R′∥ = dxdp2+dydp2+dzdp2 = dssp
If the parameter p is the time t, then R′t is the velocity vector V; and ρ=v, the speed.
Table 2.3.1 Essential tangent-vector facts for a curve defined by the position vector Rp.
The generic parameter along a curve defined parametrically by the position vector Rp is taken as p. The derivative of R with respect to its parameter is always a tangent vector. This can be inferred from the definition of the derivative of R.
R′p=ddpRp = limh→0Rp+h−Rph
This definition also suggests why the derivative is taken componentwise. The difference Rp+h−Rp is a vector whose components are each divided by h. As h→0, each component of the fraction Rp+h−Rph becomes the derivative of that component.
Figure 2.3.1 contains an animation that illustrates why this derivative results in a vector tangent to the curve described by Rp.
The blue vector is Rp+h−Rp and can be considered a "secant vector" that shrinks in length as h→0.
The green vector is Rp+h−Rph, and has the same direction as the secant vector, but does not shrink in length. In the limit as h→0, this green vector becomes tangent to the curve R.
use plots in
p1 := plot([2+4*cos(t),2+2*sin(t),t=0..1.8],color=black):
p2 := arrow([0,0],[2,4],color=black):
f1 := h -> arrow([0,0],[2+4*cos(Pi/2-h),2+2*sin(Pi/2-h)],color=red):
f2 := h -> arrow([2,4],[4*sin(h),2*cos(h)-2],color=blue):
f3 := h-> arrow([2,4], [4*sin(h)/h,(2*cos(h)-2)/h], color=green):
f4 := h -> display([f1(h),f2(h),f3(h)]):
p3 := display([seq(f4(1.5-k/10),k=0..14),seq(f4(.1-k/100),k=1..9)], insequence=true):
p4 := display([p1,p2,p3],scaling=constrained);
Figure 2.3.1 Animation: R′ is a tangent vector
If Rp is the position-vector representation of the parametric curve x=p2, y=p3, p≥0, show that limh→0Rp+h−Rph, denoted by R′p=dRdp,
is the vector x′p i+y′p j. Thus, the differentiation operator ddp is applied to R by applying it to each component of R.
If Rp is the position-vector representation of C, the parametric curve x=p cosp, y=p sinp, p∈0,3 π,
Obtain ρ=R′p and the unit tangent vector T=R′/ρ.
Graph R and the vectors R′1,R′5,R′9 along C.
Graph R and the vectors T1,T5,T9 along C.
Show that T·T′p=0, thus verifying that a unit vector is necessarily orthogonal to its derivative.
To the graph in Part (c), add the vectors T′1,T′5,T′9.
Let Rp be the position-vector representation of the parametric curve x=p2−p/2,y=4/3 p3/2, p≥0, and let Rs=Rps be the reparametrization obtained in Example 2.2.6. (Recall that s is the arc length along the curve.)
Obtain the unit tangent vector Tp=R′p/ρ.
Show that Tps=ddsRs, thus verifying that R′s is automatically a unit tangent vector.
If Rp is the position vector for the general parametric curve whose components are xp,yp,zp, and s≥0 is arc length, show that ddsRps is necessarily the unit (tangent) vector T.
If Rs is the position vector for C, a curve parametrized by s, the arc length, and Ts=R′s is the unit tangent vector along C, show that T·T′=0, thereby proving that the unit tangent vector is necessarily orthogonal to its derivative.
If Rp=xp i+yp j+zp k is a position vector and Rp=Rp is its length, show that R·dRdp = R dRdp.
Given the plane curve C defined by yx=1−x21+x2,
Obtain R⁡p, the radius-vector form of the curve, by the parametrization x=p,y=y⁡p.
Obtain R′p,ρp, and Tp, where ρ=R′ and T=R′/ρ.
Graph C and the vectors R1 and T1.
Graph ρp,p∈0,3, and determine the point x,y at which ρ is a maximum in this interval.
If Rp is the position-vector form of the curve C defined parametrically by the equations x⁡p=2+3⁢p− p2,y⁡p=cos⁡p, p∈0,π,
Obtain R′p,ρp and Tp, where ρ=R′ and T=R′/ρ.
Graph C and the vectors T0,T1,T2.
On the given interval, graph ρ and determine its absolute minimum and the point on the curve where this minimum occurs.
Given the two plane curves fx=x2,gx=8−x42,x⁢≥0,
At x=1, obtain the equation of the line tangent to y=f⁡x.
Find the coordinates of the intersection of y=g⁡x and the tangent line found in Part (a).
Construct a vector from ⁡1,f1 to the point found in Part (b).
Obtain R′⁡1, the natural tangent vector at ⁡1,f1.
Show that the vectors in Parts (c) and (d) are parallel.
(Hint: Show their components are proportional.)
Draw both curves, the tangent line (Part (a)), and the tangent vector (Part (d)).
<< Previous Section Table of Contents Next Section >>
© Maplesoft, a division of Waterloo Maple Inc., 2021. All rights reserved. This product is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation.
For more information on Maplesoft products and services, visit www.maplesoft.com
Download Help Document
What kind of issue would you like to report? (Optional)