MapleNet Installation and Setup Guide


MapleNet 2019 Installation and Setup Guide
Introduction
Installing Docker
MapleNet 2019 Installation Using a Network License
Configure the License Manager
Loading the MapleNet Docker Image
How to Start MapleNet
How to Stop MapleNet
MapleNet System Requirements
MapleNet Resources
Trademarks

MapleNet 2019 Installation and Setup Guide

Introduction

The purpose of this installation guide is to provide information on installing and configuring licensing for MapleNet. While it would be beneficial to have some prior knowledge and experience in working with container engines, specifically the Docker container engine, the information in this guide will guide you through the entire installation process, including loading, running and stopping Docker containers.

Container Engine Requirements

You must have a Container Engine installed to run the MapleNet container.

The instructions in this guide are given using the Docker Container Engine. For more information, see https://docs.docker.com/install.

For information on supported Windows, Linux and Mac platforms see https://docs.docker.com/ee/supported-platforms.

Return to the top of the MapleNet Installation and Setup Guide.

Installing Docker

Installing Docker Desktop for Windows

To install Docker Desktop for Windows, go to, https://docs.docker.com/docker-for-windows/install/, download Docker Desktop for Windows. You will need to sign in with a valid Docker ID to do this. Note: Running docker requires HyperV, the Windows hypervisior, be enabled. If HyperV is not enabled, as part of the install process you will be asked to enable it and restart your computer.

Follow the instructions provided on the page to install Docker Desktop for Windows.

Installing Docker Engine Community for Linux

To install Docker on Linux:

To install Docker Engine - Community for Linux, go to https://docs.docker.com/install/

Scroll down the page to the Server table and find your Linux configuration in the table.

Click on the link for your configuration.

Follow instructions on the page.

Installing Docker Desktop for Mac

To install Docker Desktop for Mac, go to, https://docs.docker.com/docker-for-mac/install/, download Docker Desktop for Mac. You will need to sign in with a valid Docker ID to do this.

Follow the instructions provided on the page to install Docker Desktop for Mac.

MapleNet 2019 Installation Using a Network License

64-bit Windows Installation Using a Network License

To install MapleNet 2019 on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the MapleNet System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleNet files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleNet 2019

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From download

Double-click MapleNet2019.1WindowsX64Installer.exe from where you downloaded the file.

  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MapleNet2019.1WindowsX64Installer.exe from the install disc.
  1. Follow the on-screen instructions.

NOTE

  1. Do one of the following, depending on whether you have a single or redundant license server setup.
  • If you have a single license server setup:
  1. Select Single Server, and then click Next.
  1. Enter the name or IP address of the license server in License server.
  1. Enter the port number of the license server in Port number.
  1. Click Next.
  • If you have a redundant license server setup:
  1. Select Redundant Server, and then click Next.
  1. Enter the names or IP addresses of the license servers in License server 1, License server 2, and License server 3.
  1. Enter the port numbers of the license servers in Port number 1, Port number 2, and Port number 3.
  1. Click Next.
  1. MapleNet 2019 is now installed. Prior to using MapleNet 2019, you need to Configure the License Manager.

Return to the top of the MapleNet Installation and Setup Guide.

Macintosh Installation Using a Network License

For Macintosh® installation instructions, read this section.

To install MapleNet 2019 on your Macintosh operating system, read and complete the following tasks:

Pre-Installation Instructions

  1. Check the MapleNet System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleNet files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleNet 2019

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From download

Double-click MapleNet2019.1MacInstaller.dmg from where you downloaded the file, then double-click MapleNet 2019.1 Installer.app.

  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and double-click MapleNet2019.1MacInstaller.dmg from the install disc, then double-click MapleNet 2019.1 Installer.app.
  1. Follow the on-screen instructions.

NOTE

  1. Do one of the following, depending on whether you have a single or redundant license server setup.
  • If you have a single license server setup:
  1. Select Single Server, and then click Next.
  1. Enter the name or IP address of the license server in License server.
  1. Enter the port number of the license server in Port number.
  1. Click Next.
  • If you have a redundant license server setup:
  1. Select Redundant Server, and then click Next.
  1. Enter the names or IP addresses of the license servers in License server 1, License server 2, and License server 3.
  1. Enter the port numbers of the license servers in Port number 1, Port number 2, and Port number 3.
  1. Click Next.
  1. MapleNet 2019 is now installed. Prior to using MapleNet 2019, you need to Configure the License Manager.

Return to the top of the MapleNet Installation and Setup Guide.

64-bit Linux Installation Using a Network License

To install MapleNet 2019 on your 64-bit Linux® operating system, read and complete the following tasks.

Pre-Installation Instructions

  1. Check the MapleNet System Requirements for your operating system.
  1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleNet files.
  1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
  1. Close all programs.

Install MapleNet 2019

  1. Ensure that you have reviewed the Pre-installation Instructions.
  1. Choose one of the following two options to launch the installer:
  • From download

Run MapleNet2019.1LinuxX64Installer.run from where you downloaded the file.

  • From DVD
  1. Place the install disc in the DVD-ROM drive.
  1. Locate and run MapleNet2019.1LinuxX64Installer.run from the install disc.
  1. Follow the on-screen instructions.

NOTE

  1. Do one of the following, depending on whether you have a single or redundant license server setup.
  • If you have a single license server setup:
  1. Select Single Server, and then click Next.
  1. Enter the name or IP address of the license server in License server.
  1. Enter the port number of the license server in Port number.
  1. Click Next.
  • If you have a redundant license server setup:
  1. Select Redundant Server, and then click Next.
  1. Enter the names or IP addresses of the license servers in License server 1, License server 2, and License server 3.
  1. Enter the port numbers of the license servers in Port number 1, Port number 2, and Port number 3.
  1. Click Next.
  1. MapleNet 2019 is now installed. Prior to using MapleNet 2019, you need to Configure the License Manager.

Note: Starting from Maple 14, FlexNet, the license management software used in Maple, requires Linux systems to be LSB 3.0 compatible, which may require the additional installation of some additional packages. If you are receiving the "Error detecting HostID" error message when trying to activate Maple on Linux, please ensure that the appropriate packages are installed.

  • On Ubuntu, ensure that the lsb-base and lsb-core packages are installed. The lsb-core package is not installed by default.
  • On Red Hat, ensure that the redhat-lsb package is installed.
  • On SUSE, ensure that the lsb package is installed. This package is not installed by default.

Return to the top of the MapleNet Installation and Setup Guide.

Configure the License Manager

Configure the License Manager for Windows

Before starting the Windows Network version of MapleNet 2019, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FlexNet Publisher and Activation Utilities

  1. Double-click the NetworkToolsWindowsX64Installer.exe file from the install disc or from where you downloaded the file.
  1. Close all programs, particularly Microsoft® Excel® and any previous release of MapleNet.
  1. Follow the on-screen instructions.

Activate a Network License

Network licenses for MapleNet and other Maplesoft products are registered using the Network Tools program.

MapleNet 2019 requires a MapleNet 2019 license file to operate. License files for earlier versions of MapleNet do not work with MapleNet 2019. To obtain your license file, you must use the Maple Network Tools activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. You can launch Network Tools from the Start screen or Start menu, depending on your version of Windows.
  • Click Activate Maple. Note: If you are using Windows 7, right-click Activate Maple and select Run as administrator.
  • You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
  • You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete.
  • A license file, MapleNet2019.lic, will be saved to the C:\Program Files\Maple Network Tools\activate folder. You will need this license file in the next step.

Start the License Manager for MapleNet 2019 Only

The C:\Program Files\Maple Network Tools\FLEXlm\11.13.1.2\windows directory contains license manager daemons (lmgrd and maplelmg) required to run MapleNet, as well as utilities to assist you in installing and configuring FlexNet Publisher for your system.

Start the License Manager Daemons

To set up and start the license manager daemons on a Windows Network Server:

  1. From the Start menu, select (All) Programs>Maple Network Tools>LMTools11.13.1.2. Note: If you are using Windows 8.1, from Start screen swipe up from the middle of the screen or alternatively, move the mouse to the bottom left of the screen and click the downward arrow that appears. Under the Maple Network Tools heading, click LMTools11.13.1.2.
  1. Under the Service/License File tab, click Configuration using Services.
  1. Click the Config Services tab.
  1. In the Config Services property sheet, enter or browse to the following files:

Service Name

Enter a name for the service (optional)

Path to the lmgrd.exe file

C:\Program Files\Maple Network Tools\FLEXlm\11.13.1.2\windows\lmgrd.exe

Path to the license file

C:\Program Files\Maple Network Tools\activate\MapleNet2019.lic

Path to the debug log file: Enter the path to the directory containing the debug log file. You must create this file manually (log.txt is the manually created file in the example below), as it is not automatically generated.

C:\Program Files\Maple Network Tools\FLEXlm\11.13.1.2\windows\log.txt

  1. To set up the daemons as a service (recommended), select the Use Services check box.
  1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box.
  1. Click Save Service. When prompted to save the service, click Yes.
  1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.

You can now use MapleNet 2019.

Start the License Manager for Multiple Maplesoft Products

To run multiple Maplesoft products (including MapleNet), you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store your Maplesoft product license files there as well.

Complete the following tasks:

Stop the License Manager
  1. Go to the directory of the FlexNet Publisher utilities that are currently being used and double-click lmtools.exe. Alternatively, in the Start menu, select (All) Programs>Maple Network Tools>LMTools11.13.1.2 Note: On Windows 8.1, from Start screen swipe up from the middle of the screen or alternatively, move the mouse to the bottom left of the screen and click the downward arrow that appears. Under the Maple Network Tools heading, click LMTools11.13.1.2.
  1. Under the Service/License File tab, click Configuration using Services.
  1. Click the Config Services tab. From the Server Name list, select the service currently being used.
  1. Click the Start/Stop/Reread tab, then click Stop Server.
Move All Maplesoft Product License Files to a Common Directory

Using Windows Explorer, move all of the license files to a common directory, for example, C:\Program Files\Maple Network Tools\activate.

Start the License Manager Daemons
  1. From the Start menu, select (All) Programs>Maple Network Tools >LMTools11.13.1.2. Note: On Windows 8.1, from Start screen swipe up from the middle of the screen or alternatively, move the mouse to the bottom left of the screen and click the downward arrow that appears. Under the Maple Network Tools heading, click LMTools11.13.1.2.
  1. Under the Service/License File tab, click Configuration using Services.
  1. Click the Config Services tab.
  1. In the Config Services property sheet, enter or browse for the following:

Service Name

Enter a name for the service (optional)

Path to the lmgrd.exe file

C:\Program Files\Maple Network Tools\FLEXlm\11.13.1.2\windows\lmgrd.exe

Path to the license file Note: The path to the license file should not contain a terminating backslash

C:\Program Files\Maple Network Tools\activate

Path to the debug log file: Enter the path to the directory containing the debug log file. You must create this file manually (log.txt is the manually created file in the example below), as it is not automatically generated.

C:\Program Files\Maple Network Tools\FLEXlm\11.13.1.2\windows\log.txt

  1. To set up the daemons as a service (recommended), select the Use Services check box.
  1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box.
  1. Click Save Service. When prompted to save the service, click Yes.
  1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.

You can now use your network licensed Maplesoft products.

Return to the top of the MapleNet Installation and Setup Guide.

Configure the License Manager for Mac OS X

Before starting the Mac OS® X Network version of MapleNet 2019, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FlexNet Publisher and the Activation Utilities

  1. To begin installing the FlexNet Publisher and Activation Utilities, choose one of the following:
  1. Place the MapleNet 2019 DVD in the DVD-ROM drive.
  1. Double-click NetworkToolsMacInstaller.dmg from where you downloaded the file.
  1. Run the installer by double-clicking the NetworkToolsMacInstaller icon.
  1. Follow the on-screen instructions.

Activate a Network License

Network licenses for MapleNet and other Maplesoft products are registered using the Network Tools program.

MapleNet 2019 requires a MapleNet 2019 license file to operate. License files for earlier versions of MapleNet do not work with MapleNet 2019. To obtain your license file, you must use the Maple Network Tools activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. From the Finder, open a terminal window from Applications -> Utilities.
  1. Change to the location of the activation utility directory. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.
  1. Run the activation script by issuing the command ./activation. To launch activation in console mode, use the -console option.
  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete.
  1. When prompted, enter the name or IP address of the license server.
  1. A license file, MapleNet2019.lic, will be saved to the /Users/<username>/Applications/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Start the License Manager for MapleNet 2019 Only

Start the License Manager Daemons

Before you can use MapleNet 2019, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.13.1.2/.
  1. Start the license manager daemons
  1. To start the license manager daemon (lmgrd), enter the following command at the prompt:

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, /Users/<username>/Applications/Maple_Network_Tools/activate/MapleNet2019.lic), and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Help for Starting the License Server

If you have any problems starting the license server in the system boot up files, refer to http://www.flexerasoftware.com.

You can now use MapleNet 2019.

Start the License Manager for Multiple Maplesoft Products

To run multiple Maplesoft products (including MapleNet), you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store your Maplesoft product license files there as well.

Complete the following tasks:

Stop the License Manager

Go to the location of the FlexNet Publisher utilities that are currently being used. For MapleNet 2019, the default location is /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.13.1.2/. Enter the command:

./lmdown

Move All Maplesoft Product License Files to a Common Directory

Copy all the MapleNet network license files to /Users/<username>/Applications/Maple_Network_Tools/activate.

Start the License Manager Daemons
  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.13.1.2/.
  1. When starting license manager daemons, you must enter the path to the directory containing all license files. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

  1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Return to the top of the MapleNet Installation and Setup Guide.

Configure the License Manager for Linux

Before starting the Linux Network version of MapleNet 2019, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FlexNet Publisher and the Activation Utilities

  1. Run the NetworkToolsLinuxX64Installer.run file from the install disc or from where you downloaded the file.
  1. Follow the on-screen instructions.

Activate a Network License

Network licenses for MapleNet and other Maplesoft products are registered using the Network Tools program.

MapleNet 2019 requires a MapleNet 2019 license file to operate. License files for earlier versions of MapleNet do not work with MapleNet 2019. To obtain your license file, you must use the Maple Network Tools activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. Change to the location of the activation utility directory. By default, $HOME/MapleNetworkTools/activate.
  1. Run the activation command. To launch activation in console mode, use the -console option.
  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is completed.
  1. A license file, MapleNet2019.lic, will be saved to the $HOME/MapleNetworkTools/activate directory. You will need this license file for the next step.

Start the License Manager for MapleNet 2019 Only

Start the License Manager Daemons

Before you can use MapleNet 2019, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, $HOME/MapleNetworkTools/FLEXlm/11.13.1.2/.
  1. Start the license manager daemons.

Using the C Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt,

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, $HOME/MapleNetworkTools/activate/MapleNet2019.lic) and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Using the Korn or Bourne Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt:

nohup lmgrd -c license_file_path -l debug_log 2>&1 &

Run Daemons on Startup

To have the daemons run on startup, edit the appropriate boot script (such as /etc/rc.boot, /etc/rc.local, or /etc/rc2.d/Sxxxx). For example, if you run lmgrd as a boot startup script, you can run it as a regular user by using the following su command at the prompt:

su username -c \'umask 022; lmgrd_path -c license_file_path -l log_path\'

where username is a non-privileged user; lmgrd_path is the correct path to the lmgrd file, license_file_path is the full path of the network license file (by default, $HOME/MapleNetworkTools/activate/MapleNet2019.lic), and log_path is the debug log file path. It is recommended that the network license file be called MapleNet2019.lic.

Help for Starting the License Server

If you have any problems starting the license server in the UNIX system boot up files, refer to http://www.flexerasoftware.com/.

You can now use MapleNet 2019.

Start the License Manager for Multiple Maplesoft Products

To run multiple Maplesoft products (including MapleNet), you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maplesoft product license files there as well.

Complete the following tasks:

Stop the License Manager

Go to the location of the FlexNet Publisher utilities that are currently being used. For MapleNet 2019, the default location is /usr/local/MapleNetworkTools/FLEXlm/11.13.1.2/. Enter the command:

./lmdown
Move All Maplesoft Product License Files to a Common Directory

Copy all of the MapleNet network license files to one folder, for example, $HOME/MapleNetworkTools/activate.

Start the License Manager Daemons
  1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, $HOME/MapleNetworkTools/FLEXlm/11.13.1.2/.
  1. When starting license manager daemons, you must enter the path to the directory containing all of your license files. By default, $HOME/MapleNetworkTools/activate.

Note: Point to the directory only, not an actual license file.

  1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Return to the top of the MapleNet Installation and Setup Guide.

Loading the MapleNet Docker Image

After you have installed MapleNet, next you must load the MapleNet image into Docker, from the MapleNet-2019.1.tar file.

To load the MapleNet image:

  1. Open a command prompt and navigate to the MapleNet installation folder.
  1. Run the following command:
docker load --input $TARFILE

Where $TARFILE is the path to the MapleNet-2019.1.tar file

Note: Loading the Docker image may take several minutes.

  1. Next, find the image tag using the command:
docker images

You are now ready to start MapleNet.

Return to the top of the MapleNet Installation and Setup Guide.

How to Start MapleNet

Starting MapleNet Using the docker run Command

To start MapleNet, run the following Docker command:

docker run --mount type=bind,source=$LICENSEFILE,target=/maple/license/license.dat,readonly --publish $HOSTPORT:8080 --rm maplesoft/maplenet:$IMAGETAG

Where $LICENSEFILE is the path to your MapleNet license file (license.dat). For example, in the license subdirectory of your MapleNet installation directory, $HOSTPORT is the port on the host machine on which MapleNet accepts connections, and $IMAGETAG is the tag of the MapleNet Docker image created by the installer.

Note: If $LICENSEFILE contains spaces, then you must enclose the path in quotation marks. For example, source="C:\Program Files\MapleNet\2019\license.dat".

For more information on using the docker run command, see https://docs.docker.com/engine/reference/commandline/run/

Starting MapleNet Using a docker compose File

Alternatively, you can specify MapleNet options using a docker compose (YAML) file:

version: "3.7"

services:

maplenet:

image: maplesoft/maplenet:$IMAGETAG

ports:

- "$HOSTPORT:8080"

volumes:

- type: "bind"

source: "$LICENSEFILE"

target: "/maple/license/license.dat"

read_only: true

The command used to deploy MapleNet in this case is:

docker stack deploy maplenet --compose-file <path to above file>

To view the MapleNet landing page, in a web browser, type http://$HOSTADDRESS:8080, where $HOSTADDRESS is the ip address or machine name of the machine running the Docker container, and press Enter.

For more information on the docker stack command, see https://docs.docker.com/engine/reference/commandline/stack/

For more information on docker compose files, see https://docs.docker.com/compose/gettingstarted/

Return to the top of the MapleNet Installation and Setup Guide.

How to Stop MapleNet

To stop the MapleNet Server:

  1. At the prompt, enter the command:
docker container ls

to list your running containers. Find the running MapleNet server container ID in the list.

  1. Next, to stop the container, enter:
docker stop $CONTAINERID

Where $CONTAINERID is the MapleNet container ID found in the previous step.

For more information on the docker stop command see https://docs.docker.com/engine/reference/commandline/stop/

Return to the top of the MapleNet Installation and Setup Guide.

MapleNet System Requirements

64-bit Windows Requirements

Platform

RAM

Hard Drive

Windows 10 Pro, Enterprise, or Education

8 GB

8 GB

Note: Hyper-V must be enabled.

Linux Requirements

Platform

RAM

Hard Drive

Red Hat Enterprise Linux 7

8 GB

8 GB

SUSE Linux Enterprise Desktop 15

8 GB

8 GB

Ubuntu 18.04 LTS

8 GB

8 GB

Ubuntu 18.10

8 GB

8 GB

Mac Requirements

Platform

RAM

Hard Drive

Mac OS 10.14 (Mojave)

8 GB

8 GB

Mac OS 10.13 (High Sierra)

8 GB

8 GB

Mac OS 10.12 (Sierra)

8 GB

8 GB

Browser Requirements

Browser

Version

Chrome

65 or higher

Firefox

44 or higher

Internet Explorer

11.0

Edge

44 or higher

Safari (macOS)

11 or higher

Safari (iOS)

11 or higher

Return to the top of the MapleNet Installation and Setup Guide.

MapleNet Resources

Resource

Description

MapleNet Installation Guide

System requirements and installation instructions for MapleNet. The MapleNet Installation Guide is available in the Install.html file located either on your MapleNet installation DVD or the folder where you installed MapleNet.

MapleNet Administrator Guide

Instructions for using environment variables to configure the MapleNet server. Security issues are also discussed.

MapleNet Services Guide

Outline of MapleNet services. Information on limitations of services provided as well as a summary of MapleNet API endpoints.

MapleNet API Programming Guide

A detailed description of the MapleNet API with examples.

For additional resources visit http://www.maplesoft.com/site_resources

Getting Help

To request customer support or technical support, visit http://www.maplesoft.com/support

Customer Feedback

Maplesoft welcomes your feedback. For comments related to the MapleNet product documentation, contact doc@maplesoft.com.

Return to the top of the MapleNet Installation and Setup Guide.

Trademarks

Maple, MapleNet, Maplet and Maplesoft are trademarks of Waterloo Maple Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Docker is a registered trademark of Docker Inc.

Java and all Java-based marks are trademarks or registered trademarks of Oracle and/or its affiliates.

All other brand names or product names are trademarks or registered trademarks of their respective companies.

Return to the top of the MapleNet Installation and Setup Guide.