MapleSim 5 Installation and Licensing Guide


MapleSim 5 Installation and Licensing Guide
Maple Requirements
Single User Installation
Activating Single User Versions
MapleSim Installation Using a Network License
Windows Silent Installation
Installing and Setting Up a Microsoft Visual C++ Compiler
Verifying Video Card Driver Requirements
Configure the License Manager
Named Network Licensing
How to Start MapleSim
Graphics Requirements
Virtual Machines
System Requirements
Trademarks

MapleSim 5 Installation and Licensing Guide

Maple Requirements

MapleSim 5 requires that Maple 15.01 be installed. If you have Maple 15, installing MapleSim 5 will automatically upgrade your Maple version to Maple 15.01. If you do not have Maple 15 and require Maple 15 installation and activation instructions, see the Maple 15 Installation and Licensing Guide.

Single User Installation

32-bit Windows Single User Installation

For Windows® XP, Windows Server® 2008, Windows Vista®, and Windows® 7 single user installation, read this section. For 64-bit Windows, see 64-bit Windows Single User Installation.

During the installation, you will need your purchase code, sent to you in an email.

To install MapleSim 5 on your Windows operating system, read and complete the following tasks

Pre-Installation Instructions

  1. Close all programs, particularly any previous release of Maple.

  1. Log on as administrator or ensure that you have administrator privileges.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5

  1. Ensure that you have reviewed the Pre-Installation Instructions.

  1. Choose one of the following options:

  1. Double-click MapleSim5WindowsInstaller.exe located on the MapleSim 5 installation disc.

  1. Double-click MapleSim5WindowsInstaller.exe from where you downloaded the file.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Single User License.

  1. When prompted, enter the purchase code and the required information to complete activation.

  1. If you activated successfully, you are ready to use MapleSim 5. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

64-bit Windows Single User Installation

Note: If you are using MapleSim in a 64-bit Microsoft® Windows environment, you must install and set up a Microsoft® Visual C++ compiler to use the MapleSim compiler. For instructions on setting up a Microsoft Visual C++ compiler to use with Maple, see Installing and Setting Up a Microsoft Visual C++ Compiler.

During the installation, you will need your purchase code, sent to you in an email.

To install MapleSim 5 on your Windows operating system, read and complete the following tasks

Pre-Installation Instructions

  1. Close all programs, particularly any previous release of Maple.

  1. Log on as administrator or ensure that you have administrator privileges.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5

  1. Ensure that you have reviewed the Pre-installation Instructions.

  1. Choose one of the following options:

  1. Double-click MapleSim5WindowsX86_64Installer.exe located on the MapleSim 5 installation disc.

  1. Double-click MapleSim5WindowsX86_64Installer.exe from where you downloaded the file.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Single User License.

  1. When prompted, enter the purchase code and the required information to complete activation.

  1. If you activated successfully, you are ready to use MapleSim 5. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Macintosh Single User Installation

For Macintosh® PowerPC and Intel, 32- and 64-bit, single user installation instructions, read this section.

During the installation, you will need your purchase code, sent to you in an email.

To install MapleSim 5 on your Macintosh operating system, read and complete the following tasks:

Install MapleSim 5

  1. Choose one of the following options:

  1. Double-click MapleSim5MacInstaller.dmg located on the MapleSim 5 installation disc.

  1. Double-click MapleSim5MacInstaller.dmg in the directory where you downloaded the file and then double-click the MapleSim5MacInstaller icon.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Single User License.

  1. When prompted, enter the purchase code and the required information to complete activation.

  1. If you activated successfully, you are ready to use MapleSim 5. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

32-bit Linux Single User Installation

During the installation, you will need your purchase code, sent to you in an email.

To install MapleSim 5 on your 32-bit Linux® operating systems, read and complete the following tasks.

Pre-Installation Instructions

  1. Ensure you have appropriate read and write privileges.

  1. Log on to the account that will own the MapleSim files.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5

  1. Ensure that you have reviewed the Pre-installation Instructions

  1. Run MapleSim5Linux32Installer.bin located on the MapleSim 5 installation disc or run MapleSim5Linux32Installer.bin from where you downloaded the file. To run the installer in console mode, use the -i console option.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Single User License.

  1. When prompted, enter the purchase code and the required information to complete activation.

  1. If you activated successfully, you are ready to use MapleSim 5. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Shortcuts for Desktop and Applications menus

During installation, a maplesim5.desktop file is created in the bin directory of your MapleSim 5 installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the maplesim5.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

64-bit Linux Single User Installation

To install MapleSim 5 on your 64-bit Linux operating systems, read and complete the following tasks:

Pre-Installation Instructions

  1. Ensure you have appropriate read and write privileges.

  1. Log on to the account that will own the MapleSim files.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5

  1. Ensure that you have reviewed the Pre-installation Instructions.

  1. Log on to the account that will own the MapleSim files.

  1. Run MapleSim5LinuxX86_64Installer.bin located on the MapleSim 5 installation disc or run MapleSim5LinuxX86_64Installer.bin from where you downloaded the file. To run the installer in console mode, use the -i console option.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Single User License.

  1. When prompted, enter the purchase code and the required information to complete activation.

  1. If you activated successfully, you are ready to use MapleSim 5. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Shortcuts for Desktop and Applications menus

During installation, a maplesim5.desktop file is created in the bin directory of your MapleSim 5 installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the maplesim5.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

Activating Single User Versions

Starting MapleSim 5 requires a MapleSim 5 license file to operate. License files for earlier versions of MapleSim 5 will not work with MapleSim 5. You must activate the single user version of MapleSim 5 to obtain your license file. If you are running a single user installer, you can activate during the installation process. If you do not activate during the installation process, follow the steps below.

  1. Activation requires an Internet connection. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

  1. Start MapleSim 5.

  1. When prompted to activate, click Activate.

  1. You will be prompted to enter your purchase code. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

  1. You will be prompted to enter additional information. Click Next when this is complete.

  • On Windows, you can also activate using the Start menu shortcut: (All) Programs>MapleSim 5>Tools>Activate MapleSim 5. Note: If you are using Windows Vista or Windows 7, right-click Activate MapleSim 5 and select Run as administrator.

  • On Linux, you can also activate by running the activation script located in the $HOME/Maple15/toolbox/MapleSim/license directory.

  • On Macintosh, you can also activate by running the activation script located in the toolbox/MapleSim/license folder of your 15 installation. By default, /Library/Frameworks/Maple.framework/Versions/15/toolbox/MapleSim/license.

A MapleSim 5 license file (MapleSim.dat) will be saved in the license folder of your MapleSim 5 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

Return to the top of the MapleSim 5 Installation and Licensing Guide.

MapleSim Installation Using a Network License

32-bit Windows Installation Using a Network License

For Windows® XP, Windows Server® 2008, Windows Vista®, and Windows® 7 installation using a network license, read this section. For 64-bit Windows, see 64-bit Windows Installation Using a Network License.

To install MapleSim 5 on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

  1. Close all programs, particularly any previous release of MapleSim.

  1. Log on as administrator or ensure that you have administrator privileges.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5 to the Client Machines

  1. Ensure that you have reviewed the Pre-installation Instructions.

  1. To begin installing MapleSim 5, choose one of the following:

  1. Double-click MapleSim5WindowsInstaller.exe located on the MapleSim 5 installation disc.

  1. Double-click MapleSim5WindowsInstaller.exe from where you downloaded the file.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Network License.

  1. When prompted, enter the name or IP address of the license server.

MapleSim 5 is now installed. Prior to using MapleSim 5, you need to Configure the License Manager for Windows.

64-bit Windows Installation Using a Network License

Note: If you are using MapleSim in a 64-bit Microsoft® Windows environment, you must install and set up a Microsoft® Visual C++ compiler to use the MapleSim compiler. For instructions on setting up a Microsoft Visual C++ compiler to use with MapleSim, see Installing and Setting Up a Microsoft Visual C++ Compiler.

To install MapleSim 5 on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

  1. Close all programs, particularly any previous release of MapleSim.

  1. Log on as administrator or ensure that you have administrator privileges.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5 to the Client Machines

  1. Ensure that you have reviewed the Pre-installation Instructions.

  1. To begin installing MapleSim 5, choose one of the following:

  1. Double-click MapleSim5WindowsX86_64Installer.exe located on the MapleSim 5 installation disc.

  1. Double-click MapleSim5WindowsX86_64Installer.exe from where you downloaded the file.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Network License.

  1. When prompted, enter the name or IP address of the license server.

MapleSim 5 is now installed. Prior to using MapleSim 5, you need to Configure the License Manager for Windows.

Macintosh Installation Using a Network License

To install MapleSim 5 on your Macintosh operating system, read and complete the following tasks:

Pre-Installation Instructions

  1. Close all programs.

  1. Log on as administrator or ensure that you have administrator privileges.

  1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements.

Install MapleSim 5 to the Client Machines

  1. Ensure that you have reviewed the Pre-Installation Instructions.

  1. Double-click MapleSim 5 Installer located on the MapleSim 5 installation disc or double-click MapleSim5MacInstaller.dmg in the directory where you downloaded the file and then double-click the MapleSim5MacInstaller icon.

  1. Follow the on-screen instructions.

  1. In the Choose The Type of Licensing screen, select Network License.

  1. When prompted, enter the name or IP address of the license server.

MapleSim 5 is now installed. Prior to using MapleSim 5, you need to Configure the License Manager for Mac OS X.

32-bit Linux Installation Using a Network License

To install MapleSim 5 on your 32-bit Linux operating systems, read and complete the following tasks.

Pre-Installation Instructions

  1. Ensure you have appropriate read and write privileges.

  1. Ensure that your system recognizes Rock Ridge extensions.

  1. Check the video card driver requirements for client machines.

Install MapleSim 5 to the Client Machines

  1. Ensure that you have reviewed the Pre-installation Instructions.

  1. Log on to the account that will own the MapleSim files.

  1. Run MapleSim5Linux32Installer.bin located on the MapleSim 5 installation disc or run MapleSim5Linux32Installer.bin from where you downloaded the file. To run the installer in console mode, use the -i console option.

  1. In the Choose The Type of Licensing screen, select Network License.

  1. When prompted, enter the name or IP address of the license server.

Shortcuts for Desktop and Applications menus

During installation, a MapleSim5.desktop file is created in the bin directory of your MapleSim 5 installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the MapleSim5.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

MapleSim 5 is now installed. Prior to using MapleSim 5, you need to Configure the License Manager for UNIX and Linux.

64-bit Linux Installation Using a Network License

To install MapleSim 5 on your 64-bit Linux operating systems, read and complete the following tasks:

Pre-installation Instructions

  1. Ensure you have appropriate read and write privileges.

Install MapleSim 5 to the Client Machines

  1. Ensure that you have reviewed the Pre-installation Instructions.

  1. Log on to the account that will own the MapleSim files.

  1. Run MapleSim5LinuxX86_64Installer.bin located on the MapleSim 5 installation disc or run MapleSim5LinuxX86_64Installer.bin from where you downloaded the file. To run the installer in console mode, use the -i console option.

  1. In the Choose The Type of Licensing screen, select Network License.

  1. Follow the on-screen instructions.

  1. When prompted, enter the name or IP address of the license server.

Shortcuts for Desktop and Applications menus

During installation, a MapleSim5.desktop file is created in the bin directory of your MapleSim 5 installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the MapleSim5.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

MapleSim 5 is now installed. Prior to using MapleSim 5, you need to Configure the License Manager for UNIX and Linux.

Windows Silent Installation

On Windows, it is possible to install the network version of MapleSim using a silent mode option. For Windows XP, Windows Server 2008, Windows Vista, or Windows 7 (32-bit or 64-bit) follow these instructions. You must ensure that the information in the resource file is accurate.

Pre-installation Instructions

  1. Check the Windows System Requirements.

  1. Close all programs, particularly Microsoft Excel and any previous release of MapleSim

  1. Log on as administrator or ensure that you have administrator privileges

  1. Create a resource file.

You can create a resource file automatically by running the installer with the command MapleSim5WindowsInstaller.exe -r <PATH>\installer.properties (32-bit Windows) or MapleSim5WindowsX86_64Installer.exe -r <PATH>\installer.properties (64-bit Windows), where <PATH> is the path to your specified directory. Follow the on-screen instructions and complete the installation.

You can use the installer.properties file generated by the -r flag or you can create your own using the following example as a template:

INSTALLER_UI=SILENT

#Choose Install Folder

#---------------------

USER_INSTALL_DIR=C:\Program Files\Maple 15\toolbox\MapleSim

#Install Desktop Shortcuts

#-------------------------

DESKTOP_SHORTCUTS="Yes",""

DESKTOP_SHORTCUTS_1=Yes

DESKTOP_SHORTCUTS_2=

DESKTOP_SHORTCUTS_BOOLEAN_1=1

DESKTOP_SHORTCUTS_BOOLEAN_2=0

#Choose Watcom Install Folder

#----------------------------

WATCOM_INSTALL_FOLDER=C:\watcom-1.3

#MapleSim Worksheet Association

#----------------------------

WKS_ASSOC_RESULT="Yes",""

WKS_ASSOC_RESULT_1=Yes

WKS_ASSOC_RESULT_2=

WKS_ASSOC_RESULT_BOOLEAN_1=1

WKS_ASSOC_RESULT_BOOLEAN_2=0

#Choose the Type of Licensing

#----------------------------

LICENSE="","Network License"

LICENSE_1=

LICENSE_2=Network License

LICENSE_BOOLEAN_1=0

LICENSE_BOOLEAN_2=1

LICENSE server

#----------------------------

LICENSE_SERVER=myserver.mydomain.com

PORT_NUMBER=

  1. Open a command prompt window.

  1. Browse to the directory in which your MapleSim5WindowsInstaller.exe or MapleSim5WindowsX86_64Installer.exe file is located.

  1. Run the silent installation process with the command MapleSim5WindowsInstaller.exe -f installer.properties (32-bit Windows) or MapleSim5WindowsX86_64Installer.exe -f installer.properties.

Note: If you created your installer.properties file in a directory other than the directory in which the MapleSim5WindowsInstaller.exe or MapleSim5WindowsX86_64Installer.exe file is located, you must specify the path to the installer.properties file when you run this command.

Notes

  1. The INSTALLER_UI=SILENT line is not added automatically to the installer.properties file if it was created with the -r flag during installation. If the -r flag was used to create the installer.properties file, INSTALLER_UI=SILENT must be added as the first item in the file.

  1. The template assumes MapleSim 5 will be installed into the C:\Program Files\Maple 15\toolbox\MapleSim folder. If another location is desired, change the USER_INSTALL_DIR accordingly.

  1. The template assumes MapleSim 5 desktop icons will be placed on your desktop. To change this, replace the lines in the "Install Desktop Shortcuts" section with:

DESKTOP_SHORTCUTS="","No"

DESKTOP_SHORTCUTS_1=

DESKTOP_SHORTCUTS_2=No

DESKTOP_SHORTCUTS_BOOLEAN_1=0

DESKTOP_SHORTCUTS_BOOLEAN_2=1

  1. If required, the location of the WATCOM compiler can be changed. The pathname must not contain any spaces. If you omit the WATCOM_INSTALL_FOLDER field entirely, the WATCOM compiler will not be installed.

  1. The template assumes MapleSim 5 will be the default MapleSim version (assuming other versions of MapleSim are installed on the system). To change this, replace the lines in the "MapleSim Worksheet Association" section with:

WKS_ASSOC_RESULT="","No"

WKS_ASSOC_RESULT_1=

WKS_ASSOC_RESULT_2=No

WKS_ASSOC_RESULT_BOOLEAN_1=0

WKS_ASSOC_RESULT_BOOLEAN_2=1

  1. Change the license server name (required) and add a port number (optional) accordingly

Additional Information

  • You are not provided with any feedback when you run the installer in this mode

  • While you can install the single-user version of MapleSim silently, it is not possible to activate the product at this time. After the silent installation of the single user version of MapleSim 5 is complete, from the Start menu, select All Programs, then MapleSim 5, then Tools and then Activate MapleSim 5.

Silently Uninstalling on Windows

  1. To perform a silent uninstallation of MapleSim, at a command prompt, run the following command.

"C:\Program Files\Maple 15\toolbox\MapleSim\Uninstall_MapleSim\Uninstall.exe" -i silent

Installing and Setting Up a Microsoft Visual C++ Compiler

Note: If you are using Windows Vista or Windows 7, you will need to log into an account with administrative privileges to set up and install the Microsoft Visual C++ compiler.

To install and set up the required software on your computer, perform the following steps:

Microsoft Visual C++ 2008 Express Edition

  1. Download and install the following software on your computer:

  • Microsoft Visual C++ 2008 Express Edition, which is a free download.

Note: To download Microsoft Visual C++ 2008 Edition do the following:

  1. Select the Visual Studio 2008 Express tab.

  1. Click the Visual C++ 2008 Express Edition link.

  1. Select your language.

  1. Click the Free Download button.

  1. You can manually define the %LIB%, %INCLUDE% and %PATH% environment variables used by the compiler or you can set up the Microsoft Visual C++ compiler for MapleSim 5 by specifying the path of the vcvars64.bat file that is distributed with Microsoft Windows SDK for Windows Server 2008. To specify the path of the vcvars64.bat file do one of the following:

  • If Maple is not installed on your computer, specify the path of the vcvars64.bat file during the Maple installation process.

  • If Maple is already installed on your computer, you can run a command within Maple to specify the path of the file. Perform the following steps:

  1. Open Maple.

  1. At the Maple prompt, type Compiler:-Setup() and press Enter.

  1. In the dialog box, specify the path of the vcvars64.bat file.

  1. Close Maple.

Microsoft Visual C++ 2010 Express Edition

  1. Download and install the following software on your computer

  • Microsoft Visual C++ 2010 Express Edition, which is a free download.

Note: To download Microsoft Visual C++ 2010 Edition do the following:

  1. Select the Visual Studio 2010 Express tab.

  1. Click the Visual C++ 2010 Express Edition link.

  1. Select your language.

  1. Click the Free Download button.

  1. You can manually define the %LIB%, %INCLUDE% and %PATH% environment variables used by the compiler or you can set up the Microsoft Visual C++ compiler for MapleSim 5 by specifying the path of the vcvars64.bat file created during the Maple installation process. To specify the path of the vcvars64.bat file do one of the following:

  • If Maple is not installed on your computer, the vcvars64.bat file is created during the Maple installation process. By default, the file will be created in the VC\bin directory of the latest version of Visual Studio that you have installed.

  • If Maple is already installed on your computer, a vcvars64.bat file template can be found in the bin.x86_64_WINDOWS folder in your Maple directory. You can set up the vcvars64.bat file by editing the top line in the template.

@set VSINSTALLDIR=<path to Visual Studio>

You can either copy this file to your Visual Studio installation (VC\bin) or use the edited template in the bin.x86_64_WINDOWS directory. If you use the edited template, you must include the absolute file path in the bin.x86_64_WINDOWS\launch.ini file.

compilersetup="<path to vcvars64.bat>"

Note About Setting Up the Vcvars64.bat File

There are two possible issues you may encounter while setting you the vcvars64.bat file:

  1. You do not have sufficient permissions on your machine. If this is the case, the registry scan performed by the batch file may fail and the "WindowsSdkDir not found" message is displayed. The compiler link will not work.

  1. The registry value being scanned points to an older SDK.

Solution

Open the vcvars64.bat file and do the following:

  1. Add @rem before the command, @call :GetWindowsSdkDir to disable the command.

  1. Remove the @rem command from @rem @set WindowsSdkDir=C:\Program Files\Microsoft SDKs\Windows\v7.1\.

  1. Save the changes to the file.

Verifying Video Card Driver Requirements

To optimize the performance of graphics in MapleSim 5, it is strongly recommended that you install the latest driver software available for your video card. Before using MapleSim 5, follow the steps in this section to verify and, if necessary, upgrade your video card driver software.

Identifying Your Video Card Type

32-bit and 64-bit Windows

  1. Do one of the following to open the Device Manager window:

  • (Windows 2003, and XP) Select Start, then Run. In the Open field, enter devmgmt.msc and click OK.

  • (Windows Vista, and Windows 7) Open the Start menu. In the Start Search field, search for devmgmt.msc. From the search results, click Device Manager.

  1. In the Device Manager window, expand the Display adapters section. Your video card type is listed in this section (for example, RADEON X600 Series).

32-bit and 64-bit Linux and UNIX

Note: This step requires that you are logged into your computer as a root user or have sudo access. If you are using a network or shared computer, you may need to contact your system administrator.

  1. At a command prompt, run the lspci command (the lspci command might be located in /sbin or /usr/sbin directories).

  1. In the output, search for a line that contains "VGA" or "Display controller". For example,

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

Macintosh

  1. From the Apple menu, select About this Mac.

  1. Click More Info...

  1. In the System Profiler, expand the Hardware section in the left pane and click Graphics/Displays. Your video card is displayed beside Chipset Model in the panel at the right of the window (for example, Chipset Model: ATI Radeon HD 2600Pro).

Verifying and Upgrading Your Driver Software

32-bit and 64-bit Windows

  1. In the Device Manager window, in the Display adapters section, right-click the entry for the video card used by your computer and select Update Driver... The Hardware Update Wizard is displayed.

  1. When prompted to connect to Windows Update, select Yes, this time only and click Next.

  1. Select Install the software automatically (Recommended) and click Next. The wizard checks whether a more current version of the driver software is available.

If the wizard indicates that the latest driver software is installed, click Finish to close the wizard. Your computer is configured to display graphics in MapleSim 5.

If the wizard indicates that a more current version of the driver software is available, follow the on-screen instructions to install the update.

32-bit and 64-bit Linux and UNIX

  1. Identify the driver version used by your video card. See Identifying the Driver Version Used By Your Video Card for instructions.

  1. Visit your video card vendor's web site to check whether a more current version of the driver software is available. See Obtaining the Latest Driver Software for instructions.

If the version number of the latest driver software available from the vendor matches the version number of the driver software installed on your computer, your computer is configured to display graphics in MapleSim 5. If a more current version is available, download the driver software from the web site and install it on your computer.

Note: It is not recommended that you use driver software updates automatically detected by Linux or UNIX software upgrade utilities

Macintosh

  • From the Apple menu, select Software Update...

If no driver software update is listed for your video card in the Software Update window, the latest version is installed on your computer. Your computer is configured to display graphics in MapleSim 5.

If a driver software update is listed, select the entry from the list and click Install. Follow the on-screen instructions to complete the installation.

Downloading and Installing Driver Updates From a Vendor's Web Site

If you are using Linux or UNIX operating systems, or if you are using Windows or Macintosh operating systems and the driver software that was automatically detected does not function as expected, download and install the latest driver from the web site of the video card vendor.

Identifying the Driver Version Used By Your Video Card

32-bit and 64-bit Windows
  1. In the Device Manager window, expand the Display adapters section.

  1. Right-click the entry for the video card used by your computer and select Properties. A dialog box that contains information related to your video card is displayed.

  1. Click the Driver tab. The driver version used by your video card is listed beside Driver Version at the top of the window.

32-bit and 64-bit Linux and UNIX

First, determine whether hardware accelerated graphics are turned on.

  • In the root of your Linux or UNIX installation, run the glxinfo | head command.

If hardware accelerated graphics are turned on, you will see a line that reads direct rendering: Yes. If this line reads direct rendering: No, hardware accelerated graphics are not turned on.

You can search the package management system of your Linux or UNIX installation for drivers installed on your computer. Linux and UNIX distributions use different package management systems; the instructions below are provided for the two most common Linux distributions.

dpkg-based Linux distributions such as Ubuntu

To query which packages are installed on your system, run the dpkg -l command. (Note that this is a lower-case letter L.) This command will display several lines of output, so it is useful to limit the output using the grep command. Continuing with the example above, enter the following command to search for NVIDIA® drivers.

dpkg -1 | grep -i nvidia

If you have a hardware accelerated driver installed, you will see an output line such as nvidia-glx-177. In this example, 177 is the major version number of the driver. The full driver version number is displayed in the second column. For example, it will look like 177.82-0ubuntu0.1 on a Ubuntu system.

Hardware accelerated ATI™ drivers are named fglrx on Linux. For example, the package name could be fglrx-amdcccle and the version number may look like 2:8.543-0ubuntu4.1 on a Ubuntu system.

Intel® integrated accelerated graphics hardware may contain intel in the package name or just the chipset information, such as i810.

rpm-based Linux distributions such as SuSE and Red Hat Enterprise Linux

To query which packages are installed on an rpm-based Linux system, run the rpm -qa command. This command will list every package installed on your computer, so you can limit the search by using the grep command. For example,

rpm -qa | grep nvidia.

Obtaining the Latest Driver Software

To download the latest driver software for your video card, visit the web site of your video card vendor

ATI Video Cards

Visit http://support.amd.com/us/gpudownload/Pages/index.aspx and search for the driver software for your operating system and video card type. Download and install the latest driver software available for your video card.

Note: If you are using an ATI Catalyst™ video card, download the Catalyst Software Suite.

Intel Video Cards

Visit http://www.intel.com/support/graphics/ and search for the driver software for your chipset type. Download and install the latest driver software available for your video card.

For more information about identifying your chipset type in Windows, visit http://www.intel.com/support/chipsets/sb/cs-009245.htm.

For more information on upgrading your driver software in Linux, visit http://www.intel.com/support/graphics/sb/cs-010512.htm.

NVIDIA Video Cards

Visit http://www.nvidia.com/Download/index.aspx and search for the driver software for your operating system and video card type. Download and install the latest driver software available for your video card.

Configure the License Manager

Configure the License Manager for Windows

Before starting the Windows Network version of MapleSim 5, you must obtain your license file and start the license manager by completing the following tasks.

MapleSim 5 requires a MapleSim 5 license file to operate. License files for earlier versions of MapleSim do not work with MapleSim 5. To obtain your license file, you must use the MapleSim activation program or activate off-line by following the instructions at http://www.maplesoft.com/support/Faqs/Activation. Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below. If your computer does not have an Internet connection, please contact Maplesoft customer service.

  1. Choose one of the following:

Install FLEXlm and Activation Utilities

  1. Double-click NetworkToolsInstaller_Windows.exe from the installation disc or from where you downloaded the file.

  1. Close all programs, particularly Microsoft® Excel and any previous release of MapleSim.

  1. Follow the on-screen instructions.

Activate a Network License

  1. From the Start menu, select (All) Programs>Maple Network Tools>Activate MapleSim. Note: If you are using Windows Vista or Windows 7, right-click Activate MapleSim and select Run as administrator.

  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete.

  1. A license file, MapleSim5.lic, will be saved to the C:\Program Files\Maple Network Tools\activate folder. You will need this license file in the next step.

Start the License Manager for MapleSim 5 Only

The C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows directory contains license manager daemons (lmgrd and maplelmg) required to run MapleSim, as well as utilities to assist you in installing and configuring FLEXlm for your system.

Start the License Manager Daemons

If you intend to use a Novell® server, see Novell Networks.

To set up and start the license manager daemons on a Windows Network Server:

  1. From the Start menu, select (All) Programs>Maple Network Tools>LMTools.

  1. Under the Service/License File tab, click Configuration using Services.

  1. Click the Config Services tab.

  1. In the Config Services property sheet, enter or browse to the following files:

Service Name

Enter a name for the service (optional)

Path to the lmgrd.exe file

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\lmgrd.exe

Path to the license file

C:\Program Files\Maple Network Tools\activate\MapleSim5.lic

Path to the debug log file Enter the path to the directory containing the debug log file. You must create this file manually (log.txt is the manually created file in the example below), as it is not automatically generated.

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\log.txt

  1. To set up the daemons as a service (recommended), select the Use Services check box. This is available for Windows 2003, XP, Vista, and 7.

  1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box.

  1. Click Save Service. When prompted to save the service, click Yes.

  1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.

You can now use MapleSim 5.

Start the License Manager for Multiple Maplesoft Products

To run MapleSim 5, Maple 15, and associated toolboxes, you must place all license files in the same directory. If you have other FLEXlm license files stored in one central location, you can store the MapleSim 5, Maple 15, and associated toolbox license files there as well.

Note: Maple 15 and associated toolbox licensing is compatible with licensing for Maple 14, but not with licensing for versions previous to Maple 14. Maple and toolboxes earlier than version 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Stop the License Manager
  1. Go to the directory of the FLEXlm utilities that are currently being used.

  1. Double-click lmtools.exe.

  1. Under the Service/License File tab, click Configuration using Services.

  1. Click the Config Services tab. From the Server Name list, select the service currently being used.

  1. Click the Start/Stop/Reread tab, then click Stop Server.

Move all MapleSim License Files to a Common Directory

Using Windows Explorer, move all of the license files to a common directory, for example, C:\Program Files\Maple Network Tools\activate.

Start the License Manager Daemons
  1. From the Start menu, select (All) Programs>Maple Network Tools >LMTools.

  1. Under the Service/License File tab, click Configuration using Services.

  1. Click the Config Services tab.

  1. In the Config Services property sheet, enter or browse for the following:

Service Name

Enter a name for the service (optional)

Path to the lmgrd.exe file

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\lmgrd.exe

Path to the license file Note: The path to the license file should not contain a terminating backslash

C:\Program Files\Maple Network Tools\activate

Path to the debug log file Enter the path to the directory containing the debug log file. You must create this file manually (log.txt is the manually created file in the example below), as it is not automatically generated.

C:\Program Files\Maple Network Tools\FLEXlm\11.7\windows\log.txt

  1. To set up the daemons as a service (recommended), select the Use Services check box. This is available for Windows 2003, XP, Vista and 7.

  1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box.

  1. Click Save Service. When prompted to save the service, click Yes.

  1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.

You can now use your network licensed Maplesoft products.

Novell Networks

FLEXlm does not run on Novell or IPX/SPX. Follow these instructions to install the license manager on any network that is exclusively a Novell environment.

  1. Install TCP/IP on all client machines.

  1. Select a Windows computer that has TCP/IP installed to act as a license server and run the license daemons using the Start License Manager for MapleSim 5 Only instructions.

Configure the License Manager for Mac OS X

MapleSim 5 requires a MapleSim 5 license file to operate. License files for earlier versions of MapleSim do not work with MapleSim 5. To obtain your license file, you must use the MapleSim activation program or activate off-line by following the instructions at http://www.maplesoft.com/support/Faqs/Activation. Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below. If your computer does not have an Internet connection, please contact Customer Service.

Before starting the Mac OS® X Network version of MapleSim 5, you must obtain your license file and start the license manager by completing the following tasks.

  1. Choose one of the following:

Install FLEXlm and the Activation Utilities

  1. To begin installing the FLEXlm and Activation Utilities, choose one of the following:

  1. Place the MapleSim 5 DVD in the DVD-ROM drive.

  1. Double-click NetworkToolsInstaller_Mac.dmg from where you downloaded the file.

  1. Run the installer by double-clicking the NetworkToolsInstaller_Mac icon.

  1. Follow the on-screen instructions.

Activate a Network License

  1. From the Finder, open a terminal window from Applications -> Utilities.

  1. Change to the location of the activation utility directory. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.

  1. Run the activation script by issuing the command ./activation. To launch activation in console mode, use the -console option.

  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete

  1. When prompted, enter the name or IP address of the license server.

  1. A license file, MapleSim5.lic, will be saved to the /Users/<username>/Applications/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Start the License Manager for MapleSim 5 Only

Start the License Manager Daemons

Before you can use MapleSim 5, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

  1. Navigate to the location of the FLEXlm utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/.

  1. Start the license manager daemons

  1. To start the license manager daemon (lmgrd), enter the following command at the prompt:

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, /Users/<username>/Applications/Maple_Network_Tools/activate/MapleSim5.lic), and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Help for Starting the License Server

If you have any problems starting the license server in the system boot up files, refer to http://www.flexerasoftware.com

You can now use MapleSim 5

Start the License Manager for Multiple Maplesoft Products

To run MapleSim 5 and associated toolboxes, you must place all license files in the same directory. If you have other FLEXlm license files stored in one central location, you can store the MapleSim 5 and MapleSim 5 toolbox license files there as well.

Note: Maple 15 and associated toolbox licensing is compatible with licensing for Maple 14, but not with licensing for versions previous to Maple 14. Maple and toolboxes earlier than version 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Stop the License Manager

Go to the location of the FLEXlm utilities that are currently being used. For MapleSim 5, the default location is /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/. Enter the command:

./lmdown

Move all License Files to a Common Directory

Copy all the MapleSim network license files to /Users/<username>/Applications/Maple_Network_Tools/activate.

Start the License Manager Daemons
  1. Navigate to the location of the FLEXlm utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/.

  1. When starting license manager daemons, you must enter the path to the directory containing all license files. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

  1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use both MapleSim 5 and associated toolboxes

Configure the License Manager for UNIX and Linux

Before starting the UNIX Network version of MapleSim 5, you must obtain your license file and start the license manager by completing the following tasks.

MapleSim 5 requires a MapleSim 5 license file to operate. License files for earlier versions of MapleSim do not work with MapleSim 5. To obtain your license file, you must use the MapleSim activation program or activate off-line by following the instructions at http://www.maplesoft.com/support/Faqs/Activation. Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below. If your computer does not have an Internet connection, please contact Customer Service.

  1. Choose one of the following:

Install FLEXlm and the Activation Utilities

  1. Choose one of the following:

  1. On Linux 32-bit, run the NetworkToolsInstaller_Linux.bin file from the installation disc or from where you downloaded the file.

  1. On Linux 64-bit, run the NetworkToolsInstaller_LinuxX86_64.bin file from the installation disc or from where you downloaded the file.

  1. Follow the on-screen instructions.

Activate a Network License

  1. Change to the location of the activation utility directory. By default, $HOME/Maple_Network_Tools/activate.

  1. Run the activation command. To launch activation in console mode, use the -console option.

  1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

  1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is completed.

  1. A license file, MapleSim5.lic, will be saved to the $HOME/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Start the License Manager for MapleSim Only

Start the License Manager Daemons

Before you can use MapleSim 5, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

  1. Navigate to the location of the FLEXlm utilities for your operating system. By default, $HOME/Maple_Network_Tools/FLEXlm/11.7/.

  1. Start the license manager daemons.

Using the C Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt,

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, $HOME/Maple_Network_Tools/activate/MapleSim5.lic) and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Using the Korn or Bourne Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt:

nohup lmgrd -c license_file_path -l debug_log 2>&1 &

Run Daemons on Startup

To have the daemons run on startup, edit the appropriate boot script (such as /etc/rc.boot, /etc/rc.local, or /etc/rc2.d/Sxxxx). For example, if you run lmgrd as a boot startup script, you can run it as a regular user by using the following su command at the prompt:

su username -c \'umask 022; lmgrd_path -c license_file_path -l log_path\'

where username is a non-privileged user; lmgrd_path is the correct path to the lmgrd file, license_file_path is the full path of the network license file (by default, $HOME/Maple_Network_Tools/activate/MapleSim5.lic), and log_path is the debug log file path. It is recommended that the network license file be called MapleSim5.lic.

Help for Starting the License Server

If you have any problems starting the license server in the UNIX system boot up files, refer to http://www.flexerasoftware.com/.

You can now use MapleSim 5.

Start the License Manager for Multiple Maplesoft Products

To run MapleSim 5 and associated toolboxes, you must place all license files in the same directory. If you have other FLEXlm license files stored in one central location, you can store the MapleSim 5 and MapleSim 5 toolbox license files there as well.

Note: Maple 15 and associated toolbox licensing is compatible with licensing for Maple 14, but not with licensing for versions previous to Maple 14. Maple and toolboxes earlier than version 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Stop the License Manager

Go to the location of the FLEXlm utilities that are currently being used. For MapleSim 5, the default location is /usr/local/Maple_Network_Tools/FLEXlm/11.7/. Enter the command:

./lmdown -c license_file_path

Move all MapleSim License Files to a Common Directory

Copy all of the MapleSim network license files to one folder, for example, $HOME/Maple_Network_Tools/activate.

Start the License Manager Daemons
  1. Navigate to the location of the FLEXlm utilities for your operating system. By default, $HOME/Maple_Network_Tools/FLEXlm/11.7/.

  1. When starting license manager daemons, you must enter the path to the directory containing all of your license files. By default, $HOME/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

  1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Named Network Licensing

Named Network Users run MapleSim on their own client machines. These client machines are connected to the license server over the network. The Network Named User licensing option allows system administrators to strictly enforce which users, or client machines, may run MapleSim.

When you install Maple Network Tools, an options file (.opt) is automatically created in the $Maple Network Tools/activate directory.

Note: The vendor daemon, maplelmg.opt, by default, looks for the options file with in the same directory that contains the license file used by the license server manager.

Setting Up Named Network Licensing

To set up Named Network User licensing, perform the following steps:

Edit the Options File

To manually edit the options file, perform the following steps:

  • Go to the directory that contains the options file. By default, this is $Maple Network Tools/activate.

  • INCLUDE lines in an options file state which users can run the product. Add an INCLUDE line for each product. If there is more than one user per product, add an INCLUDE line for each user, as well. Alternatively, you can use the GROUP syntax to combine authorized Named Users for a specific product.

Example 1: Specifying which users can run Maple 15 and MapleSim 5

INCLUDE Maple USER User1

INCLUDE Maple USER User2

INCLUDE Maple USER User3

INCLUDE Maple USER User4

INCLUDE MapleSim USER User3

Example 2: Using `GROUP` syntax to specify users that can run Maple 15 and MapleSim 5

GROUP Maple_users User1 User2 User3 User4

INCLUDE Maple GROUP Maple_users

INCLUDE MapleSim USER User4

Restart the License Manager.

You must restart the license manager for the changes to the options file to take effect.

How to Start MapleSim

Windows

To start MapleSim 5 in Windows:

  • Double-click the MapleSim 5 shortcut icon found on your desktop.

Macintosh

To start MapleSim 5 on a Macintosh:

  • Double-click the MapleSim 5 icon in the Applications folder.

Linux

To start MapleSim 5 on Linux:

  • Double-click the MapleSim5 icon found on your desktop

or

  1. At the command prompt, switch to the bin directory of your Maple 15 installation. By default, $HOME/maple15/bin.

  1. Run the command ./maplesim.

Graphics Requirements

To optimize the performance of graphics in MapleSim, it is strongly recommended that you use the latest driver software available for your video card. For more information on verifying your video card driver software, see Verifying Video Card Driver Requirements.

Virtual Machines

For optimal performance, you should install and run MapleSim 5 on a physical computer. If you run MapleSim 5 on a virtual machine, you may experience performance issues.

System Requirements

32-bit Windows System Requirements

Version

CPU

Recommended RAM

Hard Disk

Windows XP Pro

Intel Pentium III 650 MHz or higher or fully compatible

2 GB

2 GB

Windows XP Home

Intel Pentium III 650 MHz or higher or fully compatible

2 GB

2 GB

Windows Server 2008

Intel Pentium III 650 MHz or higher or fully compatible

2 GB

2 GB

Vista Home Basic

Intel Pentium III 1 GHz

2 GB

2 GB

Vista Home Premium

Intel Pentium III 1 GHz

2 GB

2 GB

Vista Business

Intel Pentium III 1 GHz

2 GB

2 GB

Vista Ultimate Edition

Intel Pentium III 1 GHz

2 GB

2 GB

Windows 7

Intel Pentium III 1 GHz

2 GB

2 GB

Windows XP Japanese

Intel Pentium III 650 MHz or higher or fully compatible

2 GB

2 GB

Windows Vista or Windows 7 Japanese

Intel Pentium III 1 GHz

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).

  • 16-bit color at 1024 by 768 (or greater) resolution recommended.

  • Internal TCP/IP connections enabled.

  • System performance may be affected if running below the recommended memory requirement.

64-bit Windows System Requirements

Version

CPU

Recommended RAM

Hard Disk

64-bit Windows Server 2008

Intel Pentium III 650 MHz or higher or fully compatible

2 GB

2 GB

64-bit Windows (XP,Vista, or 7)

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

64-bit Windows (XP,Vista, or 7) Japanese

AMD X86_64 1 GHz Intel Xeon, Intel 64

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).

  • 16-bit color at 1024 by 768 (or greater) resolution recommended.

  • Internal TCP/IP connections enabled.

  • System performance may be affected if running below the recommended memory requirement.

  • Classic Worksheet is not available on this platform.

Macintosh System Requirements

Vendor

CPU

Operating System

Version

Recommended RAM

Hard Disk

Apple

Intel

OS X

10.5,10.6

2 GB

2 GB

Apple

G4,G5

OS X

10.5

2 GB

2 GB

Apple

64-bit Intel

OS X

10.5, 10.6

2 GB

2 GB

Apple

64-bit G5

OS X

10.5

2 GB

2 GB

  • Java™ Runtime Environment 1.6.0_18 or higher installed

  • DVD-ROM drive (for DVD installation).

  • 16-bit color at 1024 by 768 (or greater) resolution recommended.

  • Internal TCP/IP connections enabled.

  • System performance may be affected if running below the recommended memory requirement.

  • Classic Worksheet is not available on this platform.

32-bit Linux System Requirements

Vendor

Operating System Version

CPU

Recommended RAM

Hard Disk

Red Hat

Enterprise 5 update 5,6

Intel Pentium III 650 MHz or equivalent

2 GB

2GB

SUSE Enterprise Desktop

10 SP3, 11 SP1

Intel Pentium III 650 MHz or equivalent

2 GB

2 GB

Ubuntu

10.04, 10.10

Intel Pentium III 650 MHz or equivalent

2 GB

2 GB

64-bit Linux System Requirements

Hardware Vendor

Operating System Version

CPU

Recommended RAM

Hard Disk

AMD (X86_64)

SUSE Enterprise 10 SP 3

Intel 64

2 GB

2 GB

AMD (X86_64)

SUSE Enterprise 11 SP 1

Intel 64

2 GB

2 GB

AMD (X86_64)

Red Hat Enterprise 5 update 5,6

Intel 64

2 GB

2 GB

AMD (X86_64)

Ubuntu 10.04

Intel 64

2 GB

2 GB

AMD (X86_64)

Ubuntu 10.10

Intel 64

2 GB

2 GB

  • DVD-ROM drive (for DVD installation).

  • 16-bit color at 1024 by 768 (or greater) resolution recommended.

  • X11 R6.

  • Internal TCP/IP connections enabled.

  • System performance may be affected if running below the recommended memory requirement.

  • Classic Worksheet is not available on this platform

Trademarks

Note: Maple uses the Flexera Software Corporation FLEXlm as its license manager. This document contains all the information you require for a standard Maple installation. For more information, refer to the FLEXlm documentation at http://www.flexerasoftware.com/.

Maple, Maplesoft, and Waterloo Maple are trademarks of Waterloo Maple Inc.

Intel is a registered trademark of Intel Corporation.

Microsoft, Windows, Windows Vista, Windows 7, Excel and Internet Explorer are registered trademarks of Microsoft Corporation.

Macintosh and Mac OS are registered trademarks of Apple Computer, Inc.

NVIDIA is a registered trademark of NVIDIA Corporation.

Java and JRE are registered trademarks of Oracle and/or its affiliates.

OpenGL is a registered trademark of Silicon Graphics Inc.

MATLAB is a registered trademark of The MathWorks, Inc.

FLEXlm is a trademark of Flexera Software Corporation.

All other brand names or product names are trademarks or registered trademarks of their respective companies.

Return to the top of the MapleSim 5 Installation and Licensing Guide.