Ideal Flow Source $—$ Ideal Flow Source

This component is an ideal flow source. The output is directly controlled by the input parameters or the input signal.

Connections

 Name Description Modelica ID $\mathrm{oil}$ oil ${\mathrm{port}}_{B}$ Port B, where oil leaves the component ($q<0$, ${p}_{B}<{p}_{A}$ means $0<\mathrm{Δp}$) port_B $\mathrm{commandSignal}$ Connector of input signal used as flow rate commandSignal ${q}_{\mathrm{set}}$ q_set

Parameters

 Name Default Units Description Modelica ID use input $\mathrm{true}$ If true, input port is present useInput ${\mathrm{ΔT}}_{\mathrm{system}}$ $0$ $K$ Temperature offset from system temperature dT_system ${q}_{\mathrm{bias}}$ $0.001$ $\frac{{m}^{3}}{s}$ Bias of flow qbias ${q}_{\mathrm{amp}}$ $0$ $\frac{{m}^{3}}{s}$ Amplitude of sinusoidal flow qamp ${q}_{\mathrm{freq}}$ $0$ $\mathrm{Hz}$ Frequency of sinusoidal flow qfreq ${q}_{\mathrm{phase}}$ $0$ $\mathrm{rad}$ Phase shift qphase